EE News

      Advanced

EE Open News

Electronics Engineering Open News

Battery Operated Auto Ranging DVM

Related Page - Battery Operated Auto Ranging DVM with the ICL7106

This application note describes a technique for auto-ranging a battery operated DVM suitable for panel meter applications. Also, circuit ideas will be presented for conductance and resistance measurement, 9V battery and 5V supply operations, and current measurement. The control signals necessary for auto-ranging are over-range, under-range, and clock. The over-range and under-range inputs control the direction of a scale shift, becoming active ....

on: 9/25/2019

test-measurement

Voltage and Current Regulated Power Supply

Related Page - LM723 Power Supply

Here is a Simple Voltage and Current Regulated Power Supply using the LM723 IC. With the Values Shown, It is Adjustable from 3 to 30 Volts and 0 to 3 Amps. This circuit does NOT have Output SHORT CIRCUIT Protection, So a 3 Amp Fuse on the Output would be a Good Idea. Ideally you will put an Amp-Meter,

on: 8/7/2019

power-electronics

Temperature Calibration - Cole-Parmer

Related Page - Temperature Calibration in Industrial Processes

Temperature is one of the most frequently measured parameters in industrial processes. A wide variety of mechanical and electrical thermometers are used to sense and control process temperatures. Regular calibration of these thermometers is critical to ensuring consistent quality of product manufactured, as well as providing regulatory compliance for some industries.

on: 8/5/2019

process-control

RF and Microwave Measurements

Related Page - Principles of RF and Microwave Measurements

Microwave networks are harder to analyze than their lower-frequency counterparts. The reason is that the size of a typical microwave circuit is comparable the wavelength, so phase variation along a portion of the circuit cannot be ignored as is the case at lower frequencies.

on: 7/28/2019

rf-wireless

DMM with the ICL7103A and ICL8052A

Related Page - Auto-Ranging DMM with ICL7103A and ICL8052A

The purpose of this application note is to describe the operation and potential pitfalls of a 10V resolution (VREF = 100mV) 4 1/2 digit autoranging scheme using the ICL7103A/ICL8052A pair. Two auto-ranging circuits are included within the text.

on: 7/23/2019

mixed-interface